Crucial has started to tease the T700, the company's first mainstream PCIe 5.0 SSD. Not to be confused with the Terminator T-700, the T700's product page has already gone live but still lacks some of the M.2 2280 SSD's finer details. However, it does show some basic specifications that suggest that the T700 will deliver higher performance than rival first-generation PCIe 5.0 drives.

Different as they may look, the first wave of SSDs all have something in common: they leverage Phison's PS5026-E26 PCIe 5.0 controller and its eight-channel design. There are other PCIe 5.0 SSD controllers for storage vendors to pick from, including Silicon Motion's SM2508 or InnoGrit's IG5666. However, the E26 has become the de facto PCIe 5.0 controller for PCIe 5.0 SSDs.

The T700, like many rivals before it, utilizes the E26 controller. Crucial rates the T700 with sequential read and writes up to 12.4 GB/s and 11.8 GB/s, respectively. It's twice as fast as the P5 Plus PCIe 4.0 SSD and up to 22 times faster than the MX500 SATA SSD. Crucial has granted Linus Tech Tips a small preview of the T700. An extract from the previewer's guide has exposed the T700's sequential and random performance. According to the snippet, the expected sequential read and write performance on the T700 is 12 GB/s and 11 GB/s. The figures are somewhat lower than the specifications from the T700's product page. The T700's numbers reach 1.5 million IOPS reads and writes regarding random performance. The performance varies slightly between the different capacities.

If the T700 delivers on the claims, it would make the drive one of the fastest PCIe 5.0 SSDs and put it ahead of its competitors, such as the Corsair MP700, Gigabyte Aorus Gen5 10000, or the MSI Spatium M570 Pro. The only faster drives in development are Adata's Project Nighthawk and Project Blackbird SSDs, with sequential read and write speeds of 14 GB/s and 12 GB/s and 14 GB/s and 10 GB/s, respectively. Adata's forthcoming PCIe 5.0 SSDs are the only confirmed drives to employ the Innogrit IG5666 PCIe 5.0 controller.

Crucial T700 Specifications
  1 TB 2 TB 4 TB
Seq Reads (MB/s) 11,500 12,000 12,000
Seq Writes (MB/s) 8,500 11,000 11,000
Random Reads (K IOPS) 1,200 1,500 1,500
Random Writes (K IOPS) 1,500 1,500 1,500
Endurance (TBW) 600 1,200 2,400

The E26 controller can deliver sequential read and write speeds up to 14 GB/s and 11.8 GB/s, respectively, if paired with 2,400 MT/s NAND. Unfortunately, current PCIe 5.0 SSDs are far from exploiting the E26's full potential due to the limited supplies of that newest-generation NAND. Many drives sport 1,600 MT/s NAND, so they fail to break the 10 GB/s barrier. Like its competitors, the Crucial T700 uses Micron 232-layer 3D TLC NAND chips. Micron's 232-layer NAND runs at different speeds: 1,600 MT/s, 2,000 MT/s, and 2,400 MT/s. Crucial didn't specify the grade of the NAND with the T700, but given the SSD's advertised performance, it stands to reason that the drive likely uses the 2,000 MT/s variant. There are obvious perks to Micron being the parent company. Crucial likely has dibs on the higher-binned NAND chips, so securing 2,000 MT/s NAND isn't as big of an issue. Surprisingly, Crucial didn't equip the T700 with 2,400 MT/s, but that could be a cost-benefit decision, or 2,400 MT/s NAND yields haven't reached the point where there's a steady supply.

Crucial offers the T700 in 1 TB, 2 TB, and 4 TB capacities. The 4 TB model has the best endurance at 2,400 TBW. The T700 is available with and without a heatsink, so the drive will fit into desktops, laptops, and gaming consoles. Linus Tech Tips' results showed the maximum operating temperatures between the T700 with the included heatsink (67 degrees Celsius) and the T700 with the motherboard heatsink (66 degrees Celsius) were similar after 15 minutes of stressing the SSD at 100% disk usage. However, there weren't any tests with the non-heatsink version. Many PCIe 5.0 SSDs come with beefy passive heatsinks, and some even have a tiny cooling fan for active cooling. On the T700's product page, Crucial recommends that consumers install the non-heatsink version on a motherboard or an alternate heatsink to ensure the best performance.

Crucial still needs to reveal the pricing for the T700. However, the company tweeted that the T700 will be available in May, so it's a short wait before we get more details on the PCIe 5.0 drive.

Source: Crucial

Comments Locked

28 Comments

View All Comments

  • meacupla - Thursday, March 23, 2023 - link

    Okay, well it seems evident that gen5 NVMe SSDs are going to require chonky heatsinks.

    Are SSD manufacturers going to release cooler running versions?
    or will laptop manufacturers have to resort to slower gen3/4 SSDs for their gaming/workstation lineup?
    or will laptop manufacturers just go ham and run a heatpipe cooler for a gen5 SSD for their gaming/workstation lineup?
  • NextGen_Gamer - Thursday, March 23, 2023 - link

    See, what I got out of watching Linus Tech Tips was the exact opposite. Show me a motherboard with M.2 slots on it that are *NOT* covered by the built-in motherboard heatsink/heatshield/apparatus (however you want to call it). Cause that is that Linus tested: the T700 with it's chonky heatsink, and then without covered by the standard motherboard one. And both showed the same temperatures after 15 minutes of stress testing.
  • meacupla - Thursday, March 23, 2023 - link

    Okay, but that's on desktop mobos.
    I am talking about when these are inside laptops

    And the timing of LTT youtube channel getting hacked is hilarious.
  • Techie2 - Thursday, March 23, 2023 - link

    The ridiculous massive heatsinks are NOT required for the gen 5 SSDs. These heatsinks are a GIMMICK to try and sway people who are technically challenged. It allows SSD makers to increase price and profits. In most cases the mobo maker supplied heatsink is all that is needed.
  • Otritus - Monday, March 27, 2023 - link

    Except for the fact that SSD power consumption is on the rise. Those faster reads and writes aren’t coming for free. A higher performance controller will consume higher power. Power consumption can only go down with node shrinks, but Denard scaling being dead means efficiency gains are minimal. SSDs pulling 20-30 watts aren’t that far off in the direction the industry is moving. Heat sinks if not already vital will be vital.
  • Samus - Thursday, March 23, 2023 - link

    You are right. On my TUF Z690, there is one M2 slot (out of four) that would allow a drive with a heatsink like that. Alas it's only PCIe 4.0 anyway.
  • lopri - Sunday, March 26, 2023 - link

    NVME drives can get to 90C+ without adequate air flow. It is better safe than sorry.
  • Sonic01 - Friday, March 24, 2023 - link

    I imagine it will go the same route as CPU's, thermal based throttling. possibly as you say being intergrated to the shared heatpipe solutions currently used in laptops.
  • shabby - Thursday, March 23, 2023 - link

    We want higher capacities not faster speeds.
  • RU482 - Thursday, March 23, 2023 - link

    high capacity M.2? why not just go 2.5"? 30.72TB Micron 9400

Log in

Don't have an account? Sign up now