ZOTAC to Expand Lineup of SSDs with PCIe Offeringsby Anton Shilov on January 6, 2016 6:31 AM EST
ZOTAC is primarily known for its NVIDIA GeForce-based video cards, but in the recent years, the company started to sell motherboards, small form-factor personal computers and various accessories. Last year ZOTAC introduced its entry-level solid-state drives to add another revenue stream. At the International CES 2016, ZOTAC announced its new-generation PCIe SSDs, which are expected to address higher-end market segments.
The new solid-state drives from ZOTAC will be powered by Phison’s PS5007-E7 controller as well as multi-level cell (MLC) NAND flash memory produced by Toshiba. ZOTAC claims that its new SSDs will have sequential read performance of up to 2400 MB/s and sequential write performance of up to 1200 MB/s. The new solid-state drives from ZOTAC will come in half-length half-height PCI Express 3.0 x4 card form-factor and will fully support the NVMe protocol. The first model in ZOTAC’s PCIe SSD lineup will feature 480 GB capacity and will be available sometimes in February, according to the manufacturer.
ZOTAC does not reveal too many details about its new solid-state drives, but since they are based on the Phison PS5007-E7 controller, expect support for the NVMe 1.2, error correction with 120-bit/2KB BCH code, NVMe L1 power sub-states, end-to-end data path protection, advanced global wear-leveling, an AES-256 engine and so on. The AIC form-factor also means that the controller will be able to use all of its eight transfer channels, thus, maximizing performance.
Since the Phison PS5007-E7 controller was developed not only for gaming PCs, but also for enterprise and datacenter applications, it can enable SSDs with up to 350,000 4KB random read IOPS (input/output operations per second) and up to 250,000 random write IOPS. While consumer SSDs featuring the PS5007-E7 may not hit maximum IOPS performance, they will definitely be considerably faster than any previous-generation solid-state drives.
ZOTAC’s first-generation SSDs were arguably a business experiment for the company and its parent, PC Partner Group, which specializes on production of graphics cards, motherboards and other similar products, but not on storage devices. ZOTAC’s initial SSDs use Serial ATA interface and deliver moderate levels of performance. The cautious approach makes a lot of sense. Nowadays the end-user demands SSDs with maximum durability and reliability. ZOTAC yet has to become a well-known maker of solid-state drives and if its products are not rock-solid, its brand will be harmed. As a result, the company decided to focus on maximum quality rather than on maximization of sequential reads and writes.
With its new PCIe SSDs, ZOTAC plans to deliver rather extreme levels of performance. ZOTAC’s solid-state drives with PCI Express 3.0 x4 interface may not be as fast as Samsung’s 950 Pro (at least, on paper), but if the price and performance have the right balance, many end-users will gladly buy them.
Post Your CommentPlease log in or sign up to comment.
View All Comments
jjj - Wednesday, January 6, 2016 - linkYou keep saying the new drives aren't as fast as the Samsung but the 950 Pro doesn't shine in random. You can easily argue that even Intel's offering is better , depends on usage.
Then there is the price, just days ago the 400GB Intel had a deal at some 250$ similar in price per GB to the best deals for the 950 Pro , we'll see how the new drives are priced.
dgingeri - Wednesday, January 6, 2016 - linkI much prefer the AIC form factor to the m.2 form factor. It gives the room to use more channels and enhance performance. It's annoying we don't see more consumer level drives in this form factor. All we see in AIC form factor are enterprise drives, until this one. I hope they're a reasonable price.
jardows2 - Wednesday, January 6, 2016 - linkIf you wanted to get a couple of these to RAID in a home system, what would be the common motherboard configuration to use? Most consumer boards don't have x4 slots, and the lower end boards have an x16 slot and several x1 slots. I suppose the most commonly found consumer boards that could work would end up having three x16 slots? I, of course, am speaking of the physical size, not the actual channels used.
dgingeri - Wednesday, January 6, 2016 - linkThe people who would use those low end boards wouldn't be using a PCIe SSD like this. The systems that would use this would be like a full ATX Z170 board, with two x8 slots, with x16 connectors, from the CPU and a x4/x8 slot, with a x16 connector, coming from the chipset, probably sharing PCIe channels with an m.2 slot. It might have PCIe x1 slots as well, but those don't usually see use. The only slots that really matter these days are the x16 ones. (The system integrators like Dell and HP don't seem to get this part. Don't expect their systems to support such things.)
TennesseeTony - Wednesday, January 6, 2016 - linkAny spare 16x/8x/4x slot can be used.
TennesseeTony - Wednesday, January 6, 2016 - linkI replied to the wrong comment. sorry
Kristian Vättö - Wednesday, January 6, 2016 - linkZotac doesn't make SSDs. Phison sells turnkey SSDs to customers such as Zotac, who then simply brand the drive and handle distribution, marketing etc. That's why so many non-storage brands have SSDs nowadays, and this is also why all Phison based drives perform practically the same.
JellyRoll - Friday, January 8, 2016 - linkAnd just who do you think you are? Kristian Vatto or something?